CST CodeReader 8 OBDII EOBD Scanner CodeReader Viii Creader 8 Q: Hello, I have bought 2 CST 8 and can't get update.Could...
5 of 5 Stars!
CARPROG V4.74 MAIN UNIT CAR PROG full hardware count reset cable Q: As i know that the Full Carprog V5.31 have tokens...
5 of 5 Stars!
Mongoose MFC interface Techstream Mongoose J2534 for toyota Q: i wanna to order 3pcs mongoose toyota Techstream , can...
5 of 5 Stars!
KESS V2 OBD2 Manager V1.89 KESS V2 Master without tokens limit Q: hello, i get news that kess v2 and ktag master tokens...
5 of 5 Stars!
Bluetooth Nexiq usb link Nexiq adapter kit VXTRUCKS V8 USB Link Q: Does NEXIQ 125032 USB Link have Spanish software?
5 of 5 Stars!
MAG PRO2 V4.2 OBD2 ECU Chip tuning tool v4.2 Magpro2 Q: Helo, Your magpro2 v4.2 can write ECU edc 15 16 17 med...
5 of 5 Stars!
VAGCOM 12.12 VCDS diagnostic interface Vag com 12.12 USB CAN Q: before i use vagcom 12.10.3, when use need change pc...
5 of 5 Stars!
Top quality gm tech 2 diagnose kit Vetronix Gm tech ii scan tool Q: Hello, your gm tech2 have latest version 31.007 for...
5 of 5 Stars!
CST CodeReader 8 OBDII EOBD Scanner CodeReader Viii Creader 8 Q: Hello, I have bought 2 CST 8 and can't get update.Could...
5 of 5 Stars!
CARPROG V4.74 MAIN UNIT CAR PROG full hardware count reset cable Q: As i know that the Full Carprog V5.31 have tokens...
5 of 5 Stars!
Mongoose MFC interface Techstream Mongoose J2534 for toyota Q: i wanna to order 3pcs mongoose toyota Techstream , can...
5 of 5 Stars!
KESS V2 OBD2 Manager V1.89 KESS V2 Master without tokens limit Q: hello, i get news that kess v2 and ktag master tokens...
5 of 5 Stars!
Bluetooth Nexiq usb link Nexiq adapter kit VXTRUCKS V8 USB Link Q: Does NEXIQ 125032 USB Link have Spanish software?
5 of 5 Stars!
MAG PRO2 V4.2 OBD2 ECU Chip tuning tool v4.2 Magpro2 Q: Helo, Your magpro2 v4.2 can write ECU edc 15 16 17 med...
5 of 5 Stars!
VAGCOM 12.12 VCDS diagnostic interface Vag com 12.12 USB CAN Q: before i use vagcom 12.10.3, when use need change pc...
5 of 5 Stars!
Top quality gm tech 2 diagnose kit Vetronix Gm tech ii scan tool Q: Hello, your gm tech2 have latest version 31.007 for...
5 of 5 Stars!
Quick Re-Order
Wednesday 02 September, 2015 | RSS Feed

Super GM Tech 3 Scanner GM MDI Problems and Solutions Highlights

by autodiagnosticobd.com

Super GM Tech 3 Scanner GM MDI Problems and Solutions Highlights


GM MDI scanner is GM car diagnostic tool Multiple diagnostic interface GM MDI tech 3. Autodiagnosticobd have gm mdi tech 3, high quality gm mdi china, gm mdi manager software and gm mdi with laptop, gm mdi with EVG7 for sale. According to Customers feedback, Below sharing GM MDI Problems and Solutions.
 
 
 
This GM MDI Clone is high quality, here is the PCB picture as follow:
 
 
GM MDI Problems and Solutions Highlights:
 
Problem 1:
Device not recognized. Install GM MDI software on Vista mode. But the Manager software wizard then says can not detect MDI Module on USB port. Error code 29
 
Solution:
GM MDI software should be installed on Windows XP mode. Change another computer with windows XP mode.
 
Problem 2:
Fail to install software on Windows 7 operating system.
 
Solution:
You need to install the driver. You may get it in “Windows xp drive (in VM) windows system32″. Copy two folder named as “Drive store” and “Drivers” and past it in any drive in your laptop / computer . Than open device manager of windows 7 right click the unknown device and click “update driver”. Select “browse my computer for driver software”. Then chose one of those folders and let it search and if driver is not found then again chose the other folder.
 
Problem 3:
MDI fails to self test
 
Solution:
The reason may caused by internal error in GM MDI diagnostic system. You need to connect the MDI to a PC via USB cable and do the software recovery procedure or seek help at your supplier.
 
Problem 4:
MDI fails to power up
 
Solution:
Check the connection among device, computer and vehicle. Then try to supply power to the MDI from the two different power sources, the vehicle DLC connector and the AC 12-volt Adapter.
 
Problem 5:
MDI turn off immediately when disconnect the device with vehicle and computer
 
Solution:
Power up the MDI and verify that it has the same problem when the power is removed, then replace the batteries and make sure they are properly installed. If it still fails to be off correctly, your MDI may be damaged.
 
Problem 6: 
MDI “Fatal error has occurred”. During the update process, when fail to communicate or fail to talk to ECU, the update process will be blocked and the error code detected.
 
Solution:
1. Remove the power supply when all LED turn off, or remove the battery if users can not stop power supply.
 
2. Apply power to the MDI, press and hold the power button down and about 10 seconds later, release the power button, the MDI will start up in a recovery state with only the power LED lit.
 
3. Select “MDI_Manager” icon to start the MDI Manager software, and connect the PC with the MDI by plugging the USB cable into them. When the MDI Manager software detects the MDI, it will be shown on the “Detected MDIs” window. You need to select the MDI displaying the serial number matching your MDI and click “Recover” and the MDI Manager software switches to the “MDI Manager” tab automatically. On the “Recovery of MDI” window, select the latest version of the “MDI Recovery Image “and click” Start Update “. Remember, never unplug the MDI from the PC or remove power from the MDI during the recovery process.
 
4. “The MDI will now automatically restart” message will display. Wait until you hear the ‘beep’, then the MDI is ready for use “, click” OK “. The MDI Manager software switches automatically to the MDI Explore tab and once it has finished the restart and Power on Self Test, your MDI software will recorver.
 
NOTE: All the problems are caused by artificial reasons rather than the GM MDI itself.




Mercedes sds multiplexer SD Connect C4 Xentry Software Installed

by autodiagnosticobd.com

Mercedes sds multiplexer SD Connect C4 Xentry Software Installed X200T


Mercedes sds C4 scanner is the latest one on market for all current and new coming MB vehicles. Many customers feedback, MB SD Connect compact 4 is the best and professional Mercedes diagnostic tool. Now you can use Mercedes SD Connect star diagnosis with any Laptop or PC. Autodiagnosticobd have SD Connect with 07/2015 xentry connect software Installed X200T Tablet PC.
 
 
 
MB SD Connect C4 from Autodiagnosticobd.com with C4 07/2015 Xentry Das software Installed on good conditoon X200T Tablet PC. Whether you are freshmen or the franchised dealerships, you can ust it well.
 
Because Autodiagnosticobd will boot everything for you ready to use, you can use it immediately once you received the package, plugin and play, all software well actived and set.
 
MB SD connect Compact 4 is a Mercedes wireless multiplexer, SD Connect with X200T Tablet PC has VMware version, All core accessories adopt original high quality PCB chip and cable material and guarantee the quality of the products.





News for Tuesday 01 September, 2015


View all news for Tuesday 01 September, 2015 on one page




Recent News




News archive

Email signup
Enter your email for new arrivals, brands and special offers!