Similar Products Featured

BeeProg2C Universal programmer Elnec BeeProg2C EEprom Programmer

BeeProg2C Universal programmer Elnec BeeProg2C EEprom Programmer

Press Esc key to close this popup
  • BeeProg2C Universal programmer Elnec BeeProg2C EEprom Programmer

BeeProg2C Universal programmer Elnec BeeProg2C EEprom Programmer

(2customer reviews)
Price: $828.00
Model: A1300
Shipping Weight: 2.5kg
Calculate Shipping Cost by Weight ( Pls add this items to cart )
WHOLESALE PRICE:
Quantity Unit Price Save
       
PRICE: $828.00
Add to Cart:    
     
  • Description
  • shipping
  • Payment
  • Order History
  • FAQ

BeeProg2C is auto diagnostic obd centre update version of beeprog programmer. Universal BeeProg2C is extremely fast universal USB interfaced programmer. Elnec BeeProg2C support high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface.


BeeProg2C Universal programmer Elnec BeeProg2C EEprom Programmer
Elnec BeeProg2C Universal flash programmer BeeProg2C high speed programmer


BeeProg2C Short introduction:

BeeProg2C is extremely fast universal USB interfaced programmer.
Cost effective version of BeeProg2 programmer (differences see below).
If you need to program some of the mentioned devices, see BeeProg2 programmer.
70253 supported devices from 287 manufacturers by 2.92 version of SW (27. Sep. 2012)
extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
48-pins powerful pindrivers, no adapter required for any DIL devices
ISP connector for in-circuit programming
connection to PC: USB 2.0 (up to 480 Mbit/s, high speed/full speed) and 1.1 compatible interface
after upgrade to BeeProg2, also high-speed IEEE 1284 (ECP/EPP) printer-port (LPT) interface is available
comfortable and easy to use control program, work with all versions of MS Windows from Windows 2000 to Windows 7 64-bit
unique quick reaction to customer's needs - software update can be ready within a day from request by OnDemand software
Multiprogramming possible by attaching more programmers to one PC
approved by CE laboratory to meet CE requirements

BeeProg2C multiprogramming Features

GENERAL

BeeProg2C is USB-compatible, MS Windows (from Windows 2000 to Windows 7 64-bit) based ELNEC universal programmers, built to meet the strong demand of the small manufacturing and developers community for the fast and reliable universal programmer.

BeeProg2C programmer have hardware identical with the BeeProg2 programmer, the differences are only in software. BeeProg2C have next limitations against BeeProg2:

unsupported obsolete bipolar chips (PROMs and PLDs)
unsupported obsolete EPROMs with programming voltage 21V and above
unsupported obsolete 2708 EPROMs
unsupported obsolete microcontrollers MCS48 series
unsupported obsolete microcontrollers 8751/8752 with programming voltage 21V and above
LPT port connection usage is disabled in software

BeeProg2C programmer can be any time upgraded to BeeProg2 using BeeProg2C to BeeProg2 upgrade kit

Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without family-specific module. You have freedom to choose the optimal device for your design. Using built-in in-circuit serial programming (ISP) connector, the programmer is able to program ISP capable chips in circuit.

BeeProg2C isn't only a programmer, but also a tester of TTL/CMOS logic ICs and memories. Furthermore, it allows generation of user-definable test pattern sequences.

Provides very competitive price coupled with excellent hardware design for reliable programming.

Extremely fast programming due to high-speed FPGA driven hardware and execution of time-critical routines inside of the programmer. As a result, when used in production this one-socket-programmer waits for an operator, and not the other way round.

BeeProg2C interfaces with the IBM PC compatible or higher, portable or desktop personal computers through USB (2.0/1.1) port. After upgrade to BeeProg2 can be also used parallel (printer) port.

HARDWARE

FPGA based totally reconfigurable 48 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Improved pin drivers drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices.

The programmer performs device insertion test (wrong or backward position) and contact check (poor contact pin-to-socket) before it programs each device. These capabilities, supported by overcurrent protection and signature-byte check help prevent chip damage due to operator error.

The selftest capability allow to run diagnostic part of software to thoroughly check the health of the programmer.

Built-in protection circuits eliminate damage of programmer and/or programmed device due to environment or operator failure. All the inputs of the BeeProg2C programmer, including the ZIF socket, connection to PC and power supply input, are protected against ESD up to 15kV.

BeeProg2C programmer performs programming verification at the marginal level of supply voltage, which, obviously, improves programming yield, and guarantees long data retention.

Various programming adapters are available to handle device in PLCC, JLCC, SOIC, SDIP, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP and other packages.

SOFTWARE

Programmer is driven by an easy-to-use control program with pull-down menu, hot keys and on-line help. Selecting of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name and/or part number.

Standard device-related commands (read, blank check, program, verify, erase) are boosted by some test functions (insertion test, signature-byte check), and some special functions (autoincrement, production mode - start immediately after insertion of chip into socket).

All known data formats are supported. Automatic file format detection and conversion during loading of file.

The rich-featured auto-increment function enables one to assign individual serial numbers to each programmed device - or simply increments a serial number, or the function enables one to read serial numbers or any programmed device identification signatures from a file.

The software also provide a many information about programmed device. As a special, the drawing of all available packages are provided. The software provide also explanation of chip labelling (the meaning of prefixes and suffixes at the chips) for each supported chip.
   
The software provide a full information for ISP implementation: Description of ISP connector pins for currently selected chip, recommended target design around in-circuit programmed chip and other necessary information.

The remote control feature allows to be PG4UW software flow controlled by other application – either using. BAT file commands or using DLL file. DLL file, examples (C/PAS/VBASIC/.NET) and manual are part of standard software delivery.

Jam files of JEDEC standard JESD-71 are interpreted by Jam Player. Jam files are generated by design software which is provided by manufacturer of respective programmable device. Chips are programmed in-ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG) interface).

VME files are interpreted by VME Player. VME file is a compressed binary variation of SVF file and contains high-level IEEE 1149.1 bus operations. SVF files are interpreted by SVF Player. SVF file (Serial Vector Format) contains high-level IEEE 1149.1 bus operations. SVF files are generated by design software which is provided by manufacturer of respective programmable device. Chips are programmed in-ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG) interface). VME files are generated by design software which is provided by manufacturer of respective programmable device. Chips are programmed in-ZIF or through ISP connector (IEEE 1149.1 Joint Test Action Group (JTAG) interface).

Multiple devices are possible to program and test via JTAG chain: JTAG chain (ISP-Jam), JTAG chain (ISP-VME), JTAG chain (ISP-SVF) or JTAG chain (ISP-STP).

Attaching of more BeeProg2C programmers to the same PC (through USB port) is achieved a powerful multiprogramming system, which support as many chips, as are supported by BeeProg2C programmer and without obvious decreasing of programming speed. It is important to know, there is a concurrent multiprogramming - each programmer works independently and each programmer can program different chip, if necessary.

BeeProg2C Universal flash programmer Specification

HARDWARE

Base unit DACs


USB 2.0 high-speed compatible port, up to 480 Mbit/s transfer rate
FPGA based IEEE 1284 slave printer port, up to 1MB/s transfer rate (useable after upgrade to BeeProg2)
on-board intelligence: powerful microprocessor and FPGA based state machine
three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
VCCP range 0..8V/1A
VPP1, VPP2 range 0..26V/1A
autocalibration
selftest capability
protection against surge and ESD on power supply input, parallel port connection
banana jack for ESD wrist straps connection
banana jack for connection to ground

ZIF socket pindriver

48-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 48-pin
pindrivers: 48 universal
VCCP/VPP1/VPP2 can be connected to each pin
perfect ground for each pin
FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
analog pindriver output level selectable from 1.8 V up to 26V
current limitation, overcurrent shutdown, power failure shutdown
ESD protection on each pin of socket (IEC1000-4-2: 15kV air, 8kV contact)
continuity test: each pin is tested before every programming operation

ISP connector

20-pin male type with missinsertion lock
6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices.
1x VCCP voltage (range 2V..7V/100mA), can be applied to two pins
programmed chip voltage (VCCP) with both source/sink capability and voltage sense
1x VPP voltage (range 2V..25V/50mA), can be applied to six pins
target system supply voltage (range 2V..6V/250mA)
ESD protection on each pin of ISP connector (IEC1000-4-2: 15kV air, 8kV contact)
two output signals, which indicate state of work result = LED OK and LED Error (active level: min 1.8V)
input signal, switch YES! equivalent (active level: max 0.8V)

DEVICE SUPPORT

Programmer in ZIF socket

EPROM: NMOS/CMOS, 27xxx and 27Cxxx series, with 8/16 bit data width, full support for LV series
EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width
Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, Samsung's K8Fxxxx, K8Cxxxx, K8Sxxxx, K8Pxxxx series, from 256Kbit to 1Gbit, with 8/16 bit data width, full support for LV series
NAND FLASH: Samsung K9xxx, Hynix HY27xxx, Toshiba TC58xxx, Micron MT29Fxxx, Spansion S30Mxxx, Numonyx (ex STM) NANDxxx
LBA-NAND: Toshiba THGVNxxx
mDOC H3: SanDisk (ex M-Systems) SDED5xxx, SDED7xxx, MD2533xxx, MD2534xxx, Hynix HY23xxx
Multi-chip devices: NAND+RAM, NOR+RAM, NOR+NOR+RAM, NAND+NOR+RAM
FRAM: Ramtron
MRAM: Everspin MRxxxxx8x
NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series
Serial E(E)PROM: Serial E(E)PROM: 11LCxxx, 24Cxxx, 24Fxxx, 25Cxxx, 59Cxxx, 85xxx, 93Cxxx, NVM3060, MDAxxx series, full support for LV series, AT88SCxxx
Serial Flash: standard SPI (25Pxxx, 25Fxxx, 25Lxxx, 25Bxxx, 25Txxx,25Sxxx, 25Vxxx, 25Uxxx, 25Wxxx, 45PExx), high performance Dual I/O SPI (25Dxxx, 25PXxxx), high performance Quad SPI (25Qxxx, 26Vxxx), DataFlash (AT45Dxxx, AT26Dxxx)
Configuration (EE)PROM: XCFxxx, XC17xxxx, XC18Vxxx, EPCxxx, EPCSxxx, AT17xxx, AT18Fxxx, 37LVxx
1-Wire E(E)PROM: DS1xxx, DS2xxx
PLD Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX7000AE, MAX II/G/Z
PLD Lattice: ispGAL22V10x, ispLSI1xxx, ispLSI1xxxEA, ispLSI2xxx, ispLSI2xxxA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, LC4xxxB/C/V/ZC/ZE, M4-xx/xx, M4A3-xx/xx, M4A5-xx/xx, M4LV-xx/xx, ispCLOCK, Power Manager/II, ProcessorPM
PLD: Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
other PLD: SPLD/CPLD series: AMD, AMI, Atmel, Cypress, Gould, ICT, Lattice, National Semicond., Philips, STMicroelectronics, TI (TMS), Vantis, VLSI
FPGA: Actel: ProASIC3, IGLOO, Fusion
FPGA: Lattice: MachXO, LatticeXP, ispXPGA
FPGA: Xilinx: Spartan-3AN
Clocks: TI(TMS), Cypress
Special chips: Atmel Tire Pressure Monitoring ATA6285N, ATA6286N, PWM controllers: Zilker Labs, Analog Devices, Gamma buffers: TI, Maxim ...
Microcontrollers MCS51 series: 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89Fxxx, 89LVxxx, 89LSxxx, 89LPxxx, 89Exxx, 89Lxxx, all manufacturers, Philips LPC series
Microcontrollers Intel 196 series: 87C196 KB/KC/KD/KT/KR/...
Microcontrollers Atmel ARM. ARM7: AT91SAM7Sxx, AT91SAM7Lxx, AT91SAM7Xxx, AT91SAM7XCxx, AT91SAM7SExx series; ARM9: AT91SAM9xxx series; ARM Cortex-M3: AT91SAM3Uxxx series
Microcontrollers Atmel AVR 8bit/16bit: AT90Sxxxx, AT90pwm, AT90can, AT90usb, ATtiny, ATmega, ATxmega series
Microcontrollers Atmel AVR32: AT32UC3xxxx
Microcontrollers Chipcon (TI): CC11xx, CC24xx, CC25xx series
Microcontrollers Coreriver: Atom 1.0, MiDAS1.0, 1.1, 2.0, 2.1, 2.2, 3.0 series
Microcontrollers Cypress: CY7Cxxxxx, CY8Cxxxxx
Microcontrollers ELAN: EM78Pxxx
Microcontrollers Infineon(Siemens): XC800, C500, XC166, C166 series
Microcontrollers MDT 1xxx and 2xxx series
Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, PIC24xxx, dsPIC, PIC32xxx series
Microcontrollers Motorola/Freescale: HC05, HC08, HC11, HC12, HCS08, RS08, S12, S12X, MC56F, MCF51, MCF52 series
Microcontrollers Myson MTV2xx, 3xx, 4xx, 5xx, CS89xx series
Microcontrollers National: COP8xxx series
Microcontrollers NEC: uPD70Fxxx, uPD78Fxxx series
Microcontrollers Novatek: NT68xxx series
Microcontrollers Nuvoton (Winbond): N79xxx, W77xxx, W78xxx, W79xxx, W83xxx series
Microcontrollers NXP ARM Cortex-M3: LPC13xx, LPC17xx series
Microcontrollers Philips (NXP) UOC series: UOCIII, UOC-TOP, UOC-Fighter series
Microcontrollers Philips (NXP) ARM7: LPC2xxx, PCD807xx, SAF7780xxx series
Microcontrollers Scenix (Ubicom): SXxxx series
Microcontrollers Renesas: R8C/Tiny series
Microcontrollers SGS-Thomson: ST6xx, ST7xx, ST10xx, STR7xx series
Microcontrollers SyncMOS: SM59xxx, SM73xxx, SM79xxx, SM89xxx series
Microcontrollers & Programmable System Memory STMicroelectronics: uPSD, PSD series
Microcontrollers STM: ST6xx, ST7xx, ST10xx, STR7xx, STR9xx, STM32Fxx, STM8A/S/L series
Microcontrollers Silicon Laboratories(Cygnal): C8051 series
Microcontrollers Texas Instruments: MSP430, MSC12xx series, TMS320F series
Microcontrollers Texas Instruments (ex Luminary Micro): LM3Sxxx, LM3Sxxxx series
Microcontrollers ZILOG: Z86/Z89xxx and Z8Fxxxx, Z8FMCxxxxx, Z16Fxxxx, ZGP323xxxxxx, ZLF645xxxxxxx, ZLP12840xxxxx, ZLP323xxxxxxx series
Microcontrollers other: EM Microelectronic, Fujitsu, Goal Semiconductor, Hitachi, Holtek, Novatek, Macronix, Princeton, Winbond, Samsung, Toshiba, Mitsubishi, Realtek, M-Square, ASP, Coreriver, Gencore, EXODUS Microelectronic, Megawin, Syntek, Topro, TinyARM, VersaChips, SunplusIT, Nordic, M-Square, QIXIN, Signetic, Tekmos, Weltrend, Amic, Cyrod Technologies, Ember, Ramtron, Nordic Semiconductor, Samsung ...

Programmer through ISP connector

Serial E(E)PROM: IIC series, MW series, SPI series, KEELOQ series, PLD configuration memories, UNI/O series
1-Wire E(E)PROM: DS1xxx, DS2xxx
Serial Flash: standard SPI (25xxx), DataFlash (AT45Dxxx, AT26Dxxx)
Microcontrollers Atmel: AT89Sxxx, AT90pwm, AT90can, AT90usb, AT90Sxxxx, ATtiny, ATmega, ATxmega, AT89LSxxx, AT89LPxxx
Microcontrollers Atmel AVR32: AT32UC3xxxx
Microcontrollers Chipcon (TI): CC11xx, CC24xx, CC25xx series
Microcontrollers Cypress: CY8C2xxxx
Microcontrollers Elan: EM78Pxxx, EM6xxx series
Microcontrollers EM Microelectronic: 4 and 8 bit series
Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, PIC18xxx, PIC24xxx, dsPIC, PIC32xxx series
Microcontrollers Mitsubishi: M16C
Microcontrollers Motorola/Freescale: HC08 (both 5-wire, All-wire), HC11, HC12, HCS08, S12, S12X, MC56F, MCF52 series
Microcontrollers Nordic Semiconductor: nRF24xxx
Microcontrollers NEC: uPD7xxx series
Microcontrollers Philips (NXP): LPC1xxx, LPC2xxx, LPCxx series, 89xxx series
Microcontrollers Renesas: R8C/Tiny series
Microcontrollers Realtek, M-Square
Microcontrollers Scenix (Ubicom): SXxxx series
Microcontrollers STM: ST7xxx, STR7xx, STR9xx, STM32Fxx, STM8A/S/L series
Microcontrollers Silicon Laboratories(Cygnal): C8051 series
Microcontrollers & Programmable System Memory STMicroelectronics: uPSD, PSD series
Microcontrollers TI: MSP430 (both JTAG and BSL series), MSC12xxx series
Microcontrollers ZILOG: Z8Fxxxx, Z8FMCxxxxx, Z16Fxxxx series, ZLF645x0xx
Various PLD (also by Jam/VME/SVF/STAPL/... Player/JTAG support):
Altera: MAX 3000A, MAX 7000A, MAX 7000B, MAX 7000S, MAX 9000, MAX II/G/Z
Xilinx: XC9500, XC9500XL, XC9500XV, CoolRunner XPLA3, CoolRunner-II
PLD Lattice: ispGAL22xV10x, ispLSI1xxxEA, ispLSI2xxxE, ispLSI2xxxV, ispLSI2xxxVE, ispLSI2xxxVL, M4-xx/xx, M4LV-xx/xx, M4A3-xx/xx, M4A5-xx/xx, LC4xxxB/C/V/ZC/ZE, ispCLOCK, Power Manager/II, ProcessorPM
FPGA: Actel: ProASIC3, IGLOO, Fusion
FPGA: Lattice: MachXO, LatticeXP, ispXPGA

I.C. Tester

TTL type: 54,74 S/LS/ALS/H/HC/HCT series
CMOS type: 4000, 4500 series
Static RAM: 6116 .. 624000
User definable test pattern generation

BeeProg2C Package support

support all devices in DIP with default socket
package support includes DIP, SDIP, PLCC, JLCC, SOIC, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP etc.
support devices in non-DIP packages up to 48 pins with universal adapters
programmer is compatible with third-party adapters for non-DIP support
Programming speed

Notes: It is important to say, we always use random numbers data pattern for programming speed testing. Some our competitors use "sparse" data pattern, where only few non-blank data are programmed or there are used data with only few 0 bits (FE, EF, etc.). This cheating approach can "decrease" programming time considerable. If you plan to compare, ask always which pattern they use. The programming speed depends on PC speed only slightly.

SOFTWARE

Algorithms: only manufacturer approved or certified algorithms are used. Custom algorithms are available at additional cost.

Algorithm updates: software updates are available regulary, approx. every 4 weeks, free of charge. OnDemand version of software is available for highly needed chips support and/or bugs fixes. Available nearly daily.

Main features: revision history, session logging, on-line help, device and algorithm information.
Device operations

standard:

intelligent device selection by device type, manufacturer or typed fragment of part name, automatic ID-based selection of EPROM/Flash EPROM, blank check, read, verify
program, erase, configuration and security bit program, illegal bit test, checksum, interprete the Jam Standard Test and Programming Language (STAPL), JEDEC standard JESD-71, interprete the VME files compressed binary variation of SVF files, interprete the SVF files (Serial Vector Format), interprete the Actel STAPL Player files

security:

insertion test, reverse insertion check
contact check
ID byte check

special:

production mode (automatic start immediately after device insertion)
multi-project mode
lot of serialization modes (more type of incremental modes, from-file mode, custom generator mode)
statistic
count-down mode

Buffer operations

view/edit, find/replace
fill/copy, move, byte swap, word/dword split
checksum (byte, word)
print

File load/save

no download time because programmer is PC controlled
automatic file type identification/recognition
Supported file formatsunformatted (raw) binary

unformatted (raw) binary

HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX,, ASCII HEX
Altera POF, JEDEC (ver. 3.0.A), eg. from ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer ISDATA, etc.
JAM (JEDEC STAPL Format), JBC (Jam STAPL Byte Code), STAPL (STAPL File) JEDEC standard JESD-71
VME (ispVME file VME2.0/VME3.0)
SVF (Serial Vector Format revision E)
STP (Actel STAPL file)

Operation

operating voltage 100-240V AC rated, 90-264 VAC max., 47-63 HZ
power consumption max. 20W active, about 2W sleep
dimensions 195x140x55 mm (7.7x5.5x2.2 inch)
weight 0.9kg (1.98 lb)
operating temperature 5°C ÷ 40°C (41°F ÷ 104°F)
operating humidity 20%..80%, non condensing

BeeProg2C Package:

BeeProg2C programmer
power cord
connection cable PC-programmer, USB port
ISP cable
diagnostic POD for selftest of the programmer
diagnostic POD for ISP connector - for selftest of the ISP connector
anti-dust cover for ZIF socket
user manual (both on CD and printed form)
software
calibration test report
transport case (cardboard box)


Autodignosticobd kindly Tips

1.About shipping: after you reply our confirmation email about your order details,we willl send your parcel soon.
2.About wholesaler: if you need large quantity,email to adktechobd@gmail.com.
3.Custom Issues: Due to different custom policy of every country, pls tell us what is the best price for you to declare value of the package.

Discount Coupons

1. Free discount coupon code: Click " Free discount coupon "
2. More discount, pls email: adktechobd@gmail.com

After sale service

1.One Year product quality Warranty
2.Free technical support by internet
3.Free repair and maintenance service in one year

Contact us

Phone:+86-0755-36870925
Email: ADKtechobd@gmail.com
Skype: obd2tuning.com
MSN:  ADKtechJulie@hotmail.com

If you have any problem, please do not hesitate to contact us.


 

Auto Diagnostic OBD provide many Shipping Options

 

Auto Diagnostic OBD Notice: How to ensure get parcel successfully

 

If need dropship service ( receiver's address different from your paypal address ), pls do as per " WHOLESALER DROPSHIP "

 

Auto Diagnostic OBD can send your parcel to any place you prefer. Simply choose your shipping method during Checkout.

 

1. How to know shipping cost?

 

Choose product, add to shopping cart

 

http://www.autodiagnosticobd.com/download/new/check%20shipping.jpg

 

Fill in your country and click” update”, then there is the shipping cost, our shipping cost is for normal ship, not include any surcharge, such as Remote Surchage, Customs Tax

 

Remember click “Refresh”button if you change quantity.


2. Auto Diagnostic OBD offer following shipping methods:

 

Delivery Options Delivery Time         Tracking Link
3-5 working days  www.dhl.com
3-5 working days www.ups.com
7-15 working days www.ems.com.cn (China EMS)
3-5 working days www.fedex.com
9-20 working days www.hongkongpost.com /  http://www.17track.net/IndexEn.html (less than 2KG)
7-30 working days

 

1) Usually the not-so-valuable item less than 80 USD is shipped by HKPost, SWpost and CNPost, the delivery time is 7-18 working days.

2) The items more than 150 USD is shipped to you by express. For express, It's really important for you to provide us with your correct shipping address, contact telephone number, zip code, so that we can delivery the item to you effectively and timely.

 

3)Total delivery time is the sum of the shipping time as well as the processing time, which includes selecting the product, checking quality and packing the product.

 

3. DHL Remote Area

 

Auto Diagnostic OBD Shipping fee not include remote surcharge, if your address is remote area, pls contact us via Live Support or email adktechobd@gmail.com

 

Here is the link to check whether your address is remote area: http://remoteareas.dhl.com/jsp/first.jsp

 

Fill in your country, postal code or city name, click " OK " then can know it, both postal code and city are need check, either is remote your address is remote


4. Brazil customers notice


If you are Brazil customers, please mail us telling us in advance your CPF No, it is essential for shipment and customs clearance.

 

For more Shipping details and more Delivery Time details click, pls contact with us


 

Discount Coupon for you(only available this month):

Discount Coupon Code: 0c486fbe06 ( 5usd )      over $117, this discount coupons is for you

Discount Coupon Code: 1f3968a239 ( 10usd )    over $251, this discount coupons is for you

Discount Coupon Code: 6a685df7bc ( 15usd )    over $397, this discount coupons is for you

Discount Coupon Code: 56beba6798 ( 17usd )   over $467, this discount coupons is for you

Discount Coupon Code: e15e0a4b17 ( 20usd )   over $575, this discount coupons is for you

Discount Coupon Code:  2ba5845f6e ( 25usd )    over $697, this discount coupons is for you

Discount Coupon Code:  1c5f4904c0 ( 27usd )     over $775, this discount coupons is for you

Discount Coupon Code: 60b139b295 ( 30usd )    over $891, this discount coupons is for you

Discount Coupon Code: 7a07e0e01e ( 40usd )    over $1257, this discount coupons is for you

Discount Coupon Code: 4b2570235f ( 45usd )     over $1567, this discount coupons is for you

Discount Coupon Code: a3464cb799 ( 50usd )    over $2157, this discount coupons is for you


ADKTECH online shopping mall accept Payment Terms including Credit Card, QIWI Wallet, Western union, Wire Transfer ( Bank transfer ) and MoneyGram. While different payment terms, the handing charge is different.

Auto Diagnostic OBD new released special discount for different payment terms.

1.Credit Card Payment Discount

 

credit card payment

Special: Adktech online shopping mall new released credit card payment, whether your card is visa or mastercard, all of them can direct to pay.

2. QIWI Wallet Payment Discount

 

qiwi wallet

Special: New payment terms is special for customers from Russia, and QIWI WALLET service fee is 4%.

3. Western Union Payment Discount

Special: If your total amount over 50 usd, you will get 2.5% discount. For example, if your order total amount is 100usd, you only need transfer 97.5usd to us. If you are wholesaler or distributor, you can direct send email to 
sales@eobdtool.com to get more discount.

ADKTECH Western Union Account

 

western union account

First name:  Yang 
Last Name:  Xiao

Country: China ( city is shenzhen, if required )

4. Bank transfer Payment Discount

Special:
over 500 usd, free service charge
400-500 usd, 5 usd service charge
300-400 usd, 10 usd service charge
200-300 usd, 15 usd service charge
100-200 usd, 20 usd service charge
less than 100 usd, 30 usd service charge

ADKTECH Bank Information

 

Bank Of China

Beneficial name: CNDIAG TECHNOLOGY CO., LIMITED
Beneficiary Bank Name: HSBC HONG KONG SHEUNG SHUI BRANCH
Beneficiary Bank Address: 1 Queen's Road Central, Hong Kong
SWIFT Address: HSBCHKHHHKH  (for telegraphic transfers)
Bank Account: 561 885211 838

After you place the order,  your email will get the information of our Bank

5. MoneyGram Payment Discount

Special: If your total amount over 50 usd, you will get 2.5% discount. For example, if your order total amount is 100usd, you only need transfer 97.5usd to us. If you are wholesaler or distributor, you can direct send email to 
sales@eobdtool.com to get more discount.

ADKTECH MoneyGram Account

moneygram


First name:  Yang 
Last Name:  Xiao


Any confused about our payment terms and discount policy, welcome to contact us or send email to sales@eobdtool.com.

Who Bought This Product At Recently . Total Items: 1
customers namebuyeraddressquantityfinal priceorder date
B** * ** zs S** nth** bala**@**.net Hungary 1 828 2014-11-14 11:24:19


Hi,dear friends, welcome to Auto Diagnostic Obd Centre. As new member to our website, you may meet some problems when you shopping online. Here Autodiagnosticobd.com lists some frequenency asked questions for your review, hope can help you solve your confusion.

Q1. How to creat my account,place order, know shipping cost on Autodiagnosticobd.com?

Q: How to creat my account, place order, know shipping cost on Autodiagnosticobd.com?
A: Pls visit How To Place Order On Autodiagnosticobd.com
 
Q2. How to search the product we need?

Q: How to search the product we need?
A:1)Most easy and time saving way—click “Live support” for help
   2)Enter Key words in “Search” Right on top of the page.
   3)Search as per the product Categories
   4)click “TAGS” to find specific products categories
 
Q3. Can we get discount and how can we get it?

Q: Can we get discount and how can we get it?
A: VIP customers will be offered discount, more details, pls contact us.

Q4. Can the products be shipped to any place we prefer?

Q: Can the products be shipped to any place we prefer?
A: Sure, more details, pls click Shipping in “Important Links” at the left, the middle of the page
 
Q5. How can we pay?

Q: How can we pay?
A: Auto diagnostic obd accept payment by TT, Credit card, Western Union, MoneyGram
 
Q6. How to update the product?

Q: How to update the product?
A: 1)Usually our product description could tell you
    2)Contact us for technical support
 
Q7. What if we have problem during using?

Q: What if we have problem during using?
A: Contact us for technical support. If problem can’t solved, you can ask for refund, Click Refund Policy in “Important Links” at the left, the middle of the page for details.
 
Q8. Are you the Manufacturers?

Q: Are you the Manufacturers?
A: we are trading company, but we have cooperated with factory for many years, all our products directly provided by factory.
 
Q9.  How about Customs Clearance?

Q: How about Customs Clearance?
A: The customs value writing on the invoice is the import duty that customs charge from you customers, the customs value depends on your country's tariff policy. Normally we declare the customs value with our experience, unless you want to declare with your own requirement.

More questions, pls contact us for solution!

 

 

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:

Please type review detail.
 
Quick Re-Order
Email signup
Enter your email for new arrivals, brands and special offers!